What is the track tension adjustment method in a track motor excavator?
Jul 09, 2025| Hey there! As a supplier of track motor excavators, I often get asked about the track tension adjustment method. So, I thought I'd share some insights on this crucial aspect of maintaining these powerful machines.
First off, why is track tension adjustment so important? Well, proper track tension ensures the smooth operation of your track motor excavator. If the tracks are too loose, they can easily derail, leading to downtime and costly repairs. On the other hand, if the tracks are too tight, it can cause excessive wear on the track components, reducing their lifespan and increasing fuel consumption. So, finding that sweet spot is key.
Understanding the Basics
Before we dive into the adjustment method, let's quickly go over the main components involved. The track system of an excavator consists of tracks, sprockets, idlers, and rollers. The tension of the tracks is controlled by adjusting the position of the idler. Most modern track motor excavators use a hydraulic tensioning system, which makes the adjustment process relatively straightforward.
Step-by-Step Track Tension Adjustment
Here's a step-by-step guide on how to adjust the track tension in a track motor excavator:
- Preparation: First, make sure the excavator is parked on a flat and level surface. Engage the parking brake and turn off the engine. It's also a good idea to wear appropriate safety gear, such as gloves and safety glasses.
- Locate the Tensioning System: The tensioning system is usually located near the idler at the front of the track. It may consist of a hydraulic cylinder, a grease fitting, or a combination of both. Refer to your excavator's operator's manual for the exact location.
- Check the Current Tension: Before making any adjustments, it's important to check the current tension of the tracks. You can do this by measuring the sag in the track. The sag is the distance between the bottom of the track and a straightedge placed across the top of the track. The recommended sag will vary depending on the make and model of your excavator, so refer to the operator's manual for the specific measurements.
- Adjust the Tension: If the tracks are too loose, you'll need to increase the tension. To do this, use a grease gun to add grease to the tensioning cylinder through the grease fitting. As you add grease, the hydraulic cylinder will extend, pushing the idler forward and tightening the track. Keep adding grease in small increments and check the sag after each addition until you reach the recommended tension.
If the tracks are too tight, you'll need to release some of the tension. To do this, use a wrench to loosen the bleeder valve on the tensioning cylinder. As you loosen the valve, the hydraulic pressure will decrease, allowing the idler to move backward and loosen the track. Again, make small adjustments and check the sag after each one until you reach the correct tension.
5. Final Checks: Once you've adjusted the track tension, double-check the sag to make sure it's within the recommended range. Also, visually inspect the tracks for any signs of damage or excessive wear. If you notice any issues, address them immediately.


Tips and Tricks
Here are some additional tips to keep in mind when adjusting the track tension:
- Regular Maintenance: Make track tension adjustment a part of your regular maintenance routine. Check the track tension at least once a week, especially if you're using the excavator in rough or uneven terrain.
- Use the Right Tools: Make sure you have the right tools for the job, such as a grease gun and a wrench. Using the wrong tools can damage the tensioning system and lead to inaccurate adjustments.
- Follow the Manufacturer's Recommendations: Always refer to your excavator's operator's manual for the specific track tension adjustment procedure and recommended tension settings. Following the manufacturer's recommendations will ensure the safe and efficient operation of your excavator.
- Monitor the Tracks: Keep an eye on the tracks during operation. If you notice any unusual noises, vibrations, or signs of wear, stop the excavator immediately and check the track tension.
Related Hydraulic Motors
As a track motor excavator supplier, we also offer a wide range of high-quality hydraulic motors to meet your needs. Some of our popular products include the Orbital Hydraulic Motor BM7, the OMTW Walking Motor, and the OMP BMP BM1 Hydraulic Motor for Rotary Broom. These motors are designed to provide reliable and efficient performance, even in the most demanding applications.
Contact Us for Purchasing
If you're in the market for a track motor excavator or need to replace a hydraulic motor, we'd love to hear from you. Our team of experts is here to help you find the right product for your needs and provide you with the support and service you deserve. Contact us today to start the purchasing process and take your excavation projects to the next level.
References
- [Operator's Manual for [Excavator Model]](Manufacturer's Name, Year of Publication)
- [Hydraulic Systems Handbook](Author's Name, Publisher, Year of Publication)

