What is the difference between a gear motor and a gerotor motor?

Jul 08, 2025|

 

Everyone has heard of hydraulic motors. In the machinery industry, this product is widely used. It is an actuator that converts hydraulic energy into mechanical energy. Among the many types of hydraulic motors, there are two types of motors that are easy to confuse. They are gear hydraulic motors and orbital hydraulic motors.

Gear motors are two meshing gears that rotate under the action of pressurized oil. This structure is relatively simple, but the torque it bears is smaller, and the stability at low speed is worse. The speed is generally high. At the same time, it does not require a very high degree of cleanliness of the oil, and the cost is low. Therefore, it is widely used in some mobile equipment that requires a relatively high speed, such as fans.

info-907-879
 
info-907-879

The main core components of the orbital hydraulic motor are the stator and the rotor pair, which converts hydraulic energy into mechanical energy through the cooperation of the inner and outer stators and rotors. On the surface, the stator and rotor pair looks like two inner and outer gears with different shapes, but in fact, it is completely different from the gear motor.

The hydraulic oil of the orbital hydraulic motor acts on the cavity between the stator and rotor. When the hydraulic oil is input into the cavity, part of the inner cavity in the stator and rotor forms high pressure, thereby driving the rotor to rotate. When the rotor rotates, the high and low pressure chambers change continuously, so that the rotor rotates continuously and stably. This structure is relatively complex compared to the gear motor structure, and a precise distribution mechanism is required to achieve the distribution of hydraulic oil.

Orbital hydraulic motors are low-speed and high-torque hydraulic motors. They are stable and stable at low speeds, have high torque, are more efficient than gear motors, and have lower noise. And because the clearance of orbital hydraulic motors is more precise, the requirements for the cleanliness of hydraulic oil are higher than those of gear motors. The overall cost of the motor is also higher.

Orbital hydraulic motors are widely used in many industries, such as various mechanical travel, conveying mechanisms, winches, hoists, etc. This product can be used.

Gear motors and gerotor motors have different performances and can be used in different application scenarios. When choosing, you should calculate according to their specific parameters. If you have any questions about this, you can contact us. As a factory of orbital hydraulic motors, our technical engineers will give you professional technical guidance, allowing you to easily choose the right hydraulic motor.

Send Inquiry