How To Increase The Speed Of The Cycloidal Motor?

The cycloidal motor is also very common in current use. The hydraulic system is correctly processed and assembled. The mounting surface of the hydraulic valve on the oil block should be flat, and the sealing surface of the sealing groove should be finely processed to avoid radial scratches. The connection between the hydraulic valve and the oil block and the connection preload between the oil blocks should be sufficient to prevent surface separation. How to increase the speed of the cycloidal motor?

Of course, the speed of the cycloidal motor can be increased by increasing the flow rate, but it will more or less affect the service life of the cycloidal hydraulic motor. However, as long as it is within its rated power range, there is no problem. If the oil pressure reaches the rated pressure, increasing the speed will exceed the power range it can withstand. Of course, it will damage the life of the cycloidal hydraulic motor, just like you can't eat so much but you insist on eating, and the result is that your stomach is broken.

Increasing the flow rate can only increase the speed to a limited extent, from 500 to 900, so it is recommended to change the motor model. When the flow rate of the cycloid hydraulic motor is increased to a certain level, the speed will not increase indefinitely, the internal oil pressure will increase, and the internal leakage will increase, resulting in a direct decrease in efficiency or damage to the motor.