Geroler Motor

Geroler Motor

"Motor" is the transliteration of English motor, that is, motor and engine. The working principle is that the starter rotor is driven by force rotation through the energized coil in the magnetic field, and the pinion on the rotor drives the engine flywheel to rotate. The technology was first used in the automotive industry in 1912.

  • Product Introduction
Geroler Motor

 

Principle of motor and classification of motor

"Motor" is the transliteration of English motor, that is, motor and engine. The working principle is that the starter rotor is driven by force rotation through the energized coil in the magnetic field, and the pinion on the rotor drives the engine flywheel to rotate. The technology was first used in the automotive industry in 1912.

 

1, Hydraulic motor: Traditionally refers to the output of rotary motion, the hydraulic pump provided by the energy conversion device into mechanical energy.

 

2, High-speed motor: gear motor has the advantages of small size, light weight, simple structure, good process, insensitive to oil pollution, impact resistance and small inertia. Disadvantages include large torque pulsation, low efficiency, small starting torque (only 60% - 70% of rated torque) and low speed stability.

 

3, Blade motor; It is a hydraulic motor in which the blade in the rotor slot is in contact with the housing (stator ring) and makes the rotor rotate under the action of the incoming liquid. Compared with other types of motors, the blade motor has the advantages of compact structure, small profile size, low noise, long life, etc. Its inertia is smaller than the plunger motor, but the anti-pollution ability is worse than the gear motor, and the speed can not be too high, generally working below 200r/min. Because of the large leakage, the blade motor is unstable when the load changes or the speed is low.

 

4, Radial piston motor: has good reverse characteristics, so that the motor operation is absolutely quiet, suitable for servo system. Works both ways as a motor or pump.

 

5, Axial piston motor: is a kind of axial distribution flow cycloidal hydraulic motor with rolling bearing support, the output shaft and distribution mechanism overall structure design, gear fixed rotor, both ends of the rolling bearing support, special inlet back rotation sealing ring, so that the motor allows to work under high back pressure.

 

6, Low speed hydraulic motor: simple structure, reliable work, variety specifications, low price. The disadvantage is that the volume and weight are larger, and the torque ripple is larger.

 

7, Axial piston motor: is a kind of axial distribution flow cycloidal hydraulic motor with rolling bearing support, the output shaft and distribution mechanism overall structure design, gear fixed rotor, both ends of the rolling bearing support, special inlet back rotation sealing ring, so that the motor allows to work under high back pressure.

 

8, Cycloidal motor: is a kind of internal engagement cycloidal gear type of small, low speed, large torque hydraulic motor. Its structure is simple, low speed performance is good, short-term overload ability is strong. The cycloidal motor has a stator and an active blade, the stator, blade and drive shaft divide the motor into two cavities, each cavity has an oil port, when an oil port is fed another oil, the oil is fed to push the blade to swing.

 

9, Piston air motor: is a connecting rod, crankshaft, piston, cylinder, body, distribution valve and other components. The compressed air supplies gas to each cylinder in turn through the distribution valve, so as to expand and do work, and push the crankshaft to rotate through the connecting rod. The work mainly comes from the gas expansion work.

 

Hot Tags: geroler motor, China geroler motor manufacturers, factory, hydraulic motor macau market, danfoss omp 315 hydraulic motor, low noise hydraulic motor, omvs motor, eaton 2k hydraulic motor, shaft motor

Send Inquiry

(0/10)

clearall