Danfoss OMM 32 Mini Hydraulic Motor

 

A hydraulic motor is an essential tool for anyone in need of power transmission where the use of an electric motor is not possible or desirable. The motor is powered by hydraulic fluid, making it ideal for use in a wide variety of applications, including industry, agriculture, construction, and more. With its ability to deliver high torque at low speeds, the hydraulic motor is the perfect component where high-output power is required.

 

There are various types of hydraulic motors, including radial piston, vane, and gear motors. Each offers different advantages, such as high efficiency, high power output, and low noise levels. In addition, these motors can be used in combination with other hydraulic components, such as pumps, hoses, and valves, to create powerful hydraulic systems that can be tailored to specific needs.

 

One key advantage of a hydraulic motor is its durability. Hydraulic motors are designed to withstand harsh operating conditions, such as temperature extremes and exposure to water, dust, and chemicals. This makes them ideal for use in heavy-duty applications, such as mining, drilling, and construction.

 

Another key advantage of hydraulic motors is their flexibility. Because they are powered by hydraulic fluid, the speed and direction of the motor can be easily adjusted. This makes them ideal for use in applications where precise control is required, such as in robotics or precision machinery.

A hydraulic motor is also highly efficient, often more so than comparable electric motors. This efficiency can lead to significant cost savings in the long run, particularly in applications where the motor will be operating for long periods.

 

Overall, a hydraulic motor is a powerful, durable, and flexible tool that can be used in a wide variety of applications. Whether you are in the industrial, agricultural, or construction sectors, a hydraulic motor can provide the power you need to get the job done quickly and efficiently. With its high output power and flexibility, it remains an essential component for anyone in need of reliable power transmission.

 

 

 

◎ Axial Distribution structure and column stator and rotor design with high mechanical efficiency;
◎ Special dynamic sealing ring design with high back pressure bearing capacity;
◎ Multiple installation forms of Flanges, output shafts, ports, and etc.;
◎ Small volume, compact structure and light mass.

 

 

Displacement, cc/r		8	12.5	20	32	40	50
Flow, LPM	Cont.	14	18	18	18	20	20
	Int.	20	25	25	25	25	25
Speed, RPM	Cont.	1537	1256	814	513	452	358
	Int.	2450	1940	1250	800	630	500
Pressure, MPa	Cont.	9	9	9	9	8.5	6
	Int.	14	14	14	14	14	14
Torque, Nm	Cont.	8	13	19	31	37	33
	Int.	15	23	35	57	70	88

 

◎ The intermittent operating pressure refers to the Max. allowable operating pressure at the motor inlet port, and the continuous operating pressure refers to the pressure difference between the inlet port and the return port.
◎ Do not operate the motor at the Max. speed and the Max. pressure at the same time.
◎ The motor operating time per minute must not exceed 10% under intermittent operating conditions.
◎ Recommended oil: anti-wear hydraulic oil; Viscosity: 37-73cst; Oil cleanliness: IS018/13.
◎ The Max. oil temperature should be 80℃.
◎ The series motor adopt special imported shaft seal assembly. The Max. allowable back pressure of the motor can be up to 10MPa; however, in order to obtain the good service life and comprehensive mechanical performances, the back pressure should not exceed 5MPa. If it is exceeded, it is recommended to connect the external drain pipe; when connecting the external drain pipe, ensure that the motor is always filled with oil. When connecting the external drain pipe, in addition to maintaining a low back pressure, the wear contaminants generated inside the motor can be removed and a certain cooling effect can be achieved.
◎ There should be a running-in period before the motor is operated at full load. It is recommended to run for 1h at 30% of the Max. operating pressure.
 

 

 

Circular Flange

Displacement, cc/r	8	12.5	20	32	40	50
L mm	108.5	110.5	113.5	118.5	122	126.5

 

Rhombic Flange

Displacement, cc/r	8	12.5	20	32	40	50
L mm	112	114	117	122	125.5	130

 

Standard direction of rotation: when facing shaft end of motor, shaft to rotate clockwise when the oil is fed at port A and discharged at port B.

 

 

 

Displacement, cc/r

Displacement, cc/r	8	12.5	20	32	40	50
L mm	108.5	110.5	113.5	118.5	122	126.5

 

Rhombic Flange

Displacement, cc/r	8	12.5	20	32	40	50
L mm	112	114	117	122	125.5	130

 

 

Dimension			Displacement
Flange	Output shaft	Port	8	12.5	20	32	40	50
Circular flange	Φ16 straight shaft flat key 5	Rear port G3/8	150-0001	150-0002	150-0003	150-0004	150-0005	150-0006
Circular flange	Φ16 straight shaft flat key 5	Side port G3/8	150-0011	150-0012	150-0013	150-0014	150-0015	150-0016
Rhombic flange	Φ16 straight shaft flat key 5	Rear port G3/8	150-0021	150-0022	150-0023	150-0024	150-0025	150-0026
Rhombic flange	Φ16 straight shaft flat key 5	Side port G3/8	150-0031	150-0032	150-0033	150-0034	150-0035	150-0036

 

Note: When a motor is ordered, the model and product number should be selected in the Motor Ordering Information based on the reference dimensions in the above figure; if the corresponding Dimensions and Mounting Data and product number can not be found in the ordering specifications, please contact the company marketing department.

 

Hot Tags: danfoss omm 32 mini hydraulic motor, China danfoss omm 32 mini hydraulic motor manufacturers, factory, hydraulic motor success stories, hydraulic motor competitor analysis, hydraulic motor development, hydraulic motor retail, hydraulic motor pumps, hydraulic motor maintenance